Tractor Drive Pto Transmission Shaft with Splines

Agriculture Cardan plastic guard tractor PTO shaft

1)Material: Spring steel, 65Mn, 60Si2Mn (Sup6), 28SiMnB
2)Process: Forged
3)Heat treatment: Normalized-hardened and tempered
4)Hardness: 40 - 50HRC
5)Working hours: 200-250 hrs.



Lefa has developed many spare parts for Japanese used tractors in the past 11 years. We developed the parts according to samples provided by customers.



Lefa Tractor Parts advantages:

1. Most parts we have drawings. We can provide assemble drawing for your checking.
2. Most parts are in stock. You can check the stock with us if you need.
3. Sample order also acceptable before bulk order.
4. Located in Changzhou, only 1 hour distance to Shanghai.
5. Europe market: We have Europe branch in France. We keep some stock in France.
PTO shaft Technique data:




FAQ:
Q1: Can I buy small quantity of your parts for Sample?
A: Yes, we can provide you sample if we have stock, and will send you by DHL, FEDEX according to your requirements, or find the cheapest Forwards for you.

Q2; How could I know if the product suitable for my tractor or not?
A: Please tell us which product you are interested in. We will provide you the main sizes, or you can provide your drawings or samples, we will make according to your request.

Q3: I want to find a supplier for my new products. Can you help me?
A: Yes. Please kindly offer me your drawings or samples. Our engineer will make the drawing and develop for you. We will quote you the cost.

Q4: How long for you to make a new product?
A: Usually 20-35days for the drawing ones and 35-40 days for the sampled ones. Agriculture Cardan plastic guard tractor PTO shaft

1)Material: Spring steel, 65Mn, 60Si2Mn (Sup6), 28SiMnB
2)Process: Forged
3)Heat treatment: Normalized-hardened and tempered
4)Hardness: 40 - 50HRC
5)Working hours: 200-250 hrs.



Lefa has developed many spare parts for Japanese used tractors in the past 11 years. We developed the parts according to samples provided by customers.



Lefa Tractor Parts advantages:

1. Most parts we have drawings. We can provide assemble drawing for your checking.
2. Most parts are in stock. You can check the stock with us if you need.
3. Sample order also acceptable before bulk order.
4. Located in Changzhou, only 1 hour distance to Shanghai.
5. Europe market: We have Europe branch in France. We keep some stock in France.
PTO shaft Technique data:




FAQ:
Q1: Can I buy small quantity of your parts for Sample?
A: Yes, we can provide you sample if we have stock, and will send you by DHL, FEDEX according to your requirements, or find the cheapest Forwards for you.

Q2; How could I know if the product suitable for my tractor or not?
A: Please tell us which product you are interested in. We will provide you the main sizes, or you can provide your drawings or samples, we will make according to your request.

Q3: I want to find a supplier for my new products. Can you help me?
A: Yes. Please kindly offer me your drawings or samples. Our engineer will make the drawing and develop for you. We will quote you the cost.

Q4: How long for you to make a new product?
A: Usually 20-35days for the drawing ones and 35-40 days for the sampled ones.

Semi Gantry Crane are a cost-effective alternative which just have one side support leg, the other  leg traveling on the ground rail, the other side is the end of the bridge girder same as the Overhead Crane end beam, it is traveling on the bracket rail. They are also an ideal supplement to overhead/bridge cranes at the workstation level.
The advantage of semi Gantry Crane is that it can be installed below overhead cranes that already exist. That realized the extensive cover of the floor area. Semi Gantry crane is mainly used in Steel, Forest Products, Intermodal, Biomass/Pellet, Concrete and many other industries.

Semi Gantry Crane

Semi Gantry,Semi Goliath Crane,Semi Portal Crane,Grua Semi Gantry

XINXIANG DEGONG MACHINERY CO., LTD. , https://www.degongcrane.com