The use of compressed garbage truck lubricants must know driver's friends - Xia Gong Chu Sheng
First of all, it is the washers between the parts must be carried out according to the technical specifications in terms of assembly quality. Secondly, all kinds of fastening bolts on the vehicle must be tightened according to the specified torque, not too tight nor too loose. Replacement of failed oil seals occurs because these oil seals have aged and lost their elasticity. Again, regular check, dredge, and cleaning of the check valve or vent valve on the vehicle should be performed regularly. To prevent clogging and increase fuel consumption. Finally, it is the most common occurrence of oil leakage in the hub of a vehicle. This phenomenon is mainly caused by too much grease, or improper oil packaging, and that the brakes frequently make the hub temperature too high. There is a possibility that this oil leak may occur when the nut on the axle is loose. Regularly clean the coarse and fine oil filters, and check the crankcase ventilation check valve, we must ensure good ventilation of the crankcase, which is to prevent deterioration of the lubricant.
To maintain the normal temperature of the lubricating oil, the temperature should not be too high, there is the need to strengthen the maintenance of the car, to maintain a good holding condition, try to reduce the loss of lubricating oil
Oxygen Plant is one kind of oxygen generation system producing oxygen. There are several types, one is small Oxygen Concentrator, producing small flow rate oxygen up to 20 liter per minute, it is mainly used at home. Another type is bigger flow rate oxygen plant, also using pressure swing adsorption technology. With this technology, oxygen with flow rate up to 200 Nm3/hr is suitable. For oxygen production flow rate from 200 to 3000 Nm3/hr, more suitable solution is using vacuum pressure swing adsorption technology. Its operation cost is more lower than PSA for this big flow rate oxygen production. For oxyen production bigger than 3000 Nm3/hr, normally use cryogenic technology. With this technology, oxygen production capacity can be 100000 Nm3/hr.
Cylinder Filling Oxygen Plant,Psa Oxygen Plant,Medical Oxygen Plant,Hospital Oxygen Plant,Gaseous Oxygen Plant
Shandong Gamma Gas Engineering Co. Ltd. , https://www.gammagases.com