Chicago 3-11 Alarm fire in Bridgeport 12-31-11

At approximately 8:00 AM this morning, the Chicago Fire Department responded to a report of black smoke coming from a four-story warehouse located at 1427 W. 37th Street. Upon arrival, first responders confirmed a fire and quickly escalated the alarm to a 2-11 within minutes. A 3-11 was called about 30 minutes later and remained active until around 9:30 AM. The scene saw significant activity with three tower ladders and the Snorkel from Squad 1 working alongside one multi-purpose unit and hand lines. Seven engines (19, 28, 29, 39, 49, 50, and 65) were also on-site, providing critical support throughout the operation.
Chicago 3-11 alarm fire at 1428 w 37th Street 12-31-11

Looking at the scene facing west on 37th Street, Engine 29 is on a hydrant with Squad 1A and Tower Ladder 37 working in Sector 1. Larry Shapiro photo

Chicago 3-11 alarm fire at 1428 w 37th Street 12-31-11

Light smoke pushes out of the building at 1428 W. 27th Street this morning. Josh Boyajian photo

As the fire progressed, crews encountered stacks of 55-gallon drums inside the building, prompting a Level I Haz Mat response. Fortunately, the drums were empty, as the building’s occupant is a manufacturer of industrial drums and containers. This helped avoid more serious complications during the operation.
Chicago 3-11 alarm fire at 1428 w 37th Street 12-31-11

55-gallon drums were stacked throughout the building prompting a Haz Mat Level I, though the barrels were empty. Larry Shapiro photo

Chicago 3-11 alarm fire at 1428 w 37th Street 12-31-11

Squad 1 works in the background and Engine 29 supplies them with water. Josh Boyajian photo

Chicago 3-11 alarm fire at 1428 w 37th Street 12-31-11

Higgins Brothers, Inc. manufactures industrial drums and containers. Larry Shapiro photo

Chicago 3-11 alarm fire at 1428 w 37th Street 12-31-11

Tower Ladder 5 was in the rear of the building. Larry Shapiro photo

Chicago 3-11 alarm fire at 1428 w 37th Street 12-31-11

Tower Ladder 37 was setup at the 1-2 corner of the building on 37th Street. Larry Shapiro photo

Chicago 3-11 alarm fire at 1428 w 37th Street 12-31-11

Tower Ladder 39, running with a spare unit, was in the adjacent lot on the east side of the building in Sector 4. Larry Shapiro photo

Chicago 3-11 alarm fire at 1428 w 37th Street 12-31-11

Companies enter in the rear of the building after the fire is knocked down. Larry Shapiro photo

Throughout the incident, multiple units worked together efficiently to contain the fire and prevent it from spreading further. The fire was eventually brought under control, and no injuries were reported. The Chicago Tribune has an article on the fire HERE. Larry Shapiro and Tim Olk were at the scene as well as several other photographers. A gallery can be found HERE.

Waste Management Shredding

Waste Management Shredding

Shredder recycling is an important waste management and resource recycling technology. It uses shredders to shred various waste materials into small pieces or particles for subsequent processing and recycling. This technology plays an important role in modern industry and environmental protection.

1. Working principle

Shredding process: The shredder cuts, tears and breaks the materials through rotating blades or knife rollers, and shreds large or whole pieces of waste items into small pieces or particles.

Classification and processing: The shredded materials can be classified according to their materials, such as metal, plastic, paper, rubber, etc., for further processing and recycling.

2. Application areas

Industrial waste: Shredders are widely used to treat industrial waste, such as scrap metal, waste plastic, waste paper, waste rubber, etc. After shredding, these materials can be smelted, regranulated or other reprocessing processes to achieve resource reuse.

Electronic waste: Electronic waste (such as scrap computers, mobile phones, etc.) contains a large amount of valuable metals and other materials. Shredders can shred electronic waste to facilitate the extraction and recovery of valuable components.

Domestic waste: Shredders are also used to process domestic waste, tearing up large pieces of waste (such as furniture, electrical appliances, etc.) to reduce volume and facilitate transportation and processing.

3. Environmental protection

Reducing landfill: By shredding and recycling, the amount of waste directly landfilled can be reduced, reducing environmental pollution and land resource occupation.

Resource reuse: Shredder recycling technology promotes the recycling of waste materials, reduces dependence on primary resources, and saves energy and resources.

Shredder Knife,Waste Shredder,Shredder, Blade,Shredder Machine

HuataoGroup , https://www.industrial-knives.cn