Led mobile advertising car how to maintain a good fan?
The fans of LED mobile advertising vehicles may not be worth mentioning at all, but there is also an important link between fans and mobile advertising vehicles. The fan is an electronic component that can give heat to a mobile advertising vehicle and it is relatively easy to dissipate heat. In order to stabilize the speed of driving a mobile advertising vehicle, there will be some failures. The maintenance of LED mobile advertising fan fans is an urgent task.
1. The most frequently used components in the fans of mobile advertising vehicles are the bearings. The bearings are often under a high-speed operation, so the degree of lubrication is also very high, when the LED mobile advertising fan in the process of operating there is some noise, this time using a few drops of lubricant in the LED Losing the bearing of a mobile advertising vehicle. Do not forget to use edible oils. This will damage the vehicle's bearings.
2. If some parts of the fan of the LED mobile advertising vehicle have some looseness, it may be due to some noise emitted during the driving of the vehicle. This will not only interfere with the driving attention of LED mobile advertising vehicles, but will also cause the gaps in the wear and tear of the vehicle bearings to increase. If there are loose parts, you can remove the fan of the LED mobile advertising car, and then tighten the screws. The fan needs to be cleaned regularly so that it can be used without affecting the use and it can be reduced to a certain extent.
3. If the fan of the LED mobile advertising vehicle is performing heat dissipation, the obtained effect is not very good. It may be caused by the fact that the center of gravity of the fan blade of the LED mobile advertising vehicle fan is not caused by the axis. This is also what the old drivers often say about eccentricity. Although this kind of failure seems to be not very serious at the moment, it will be a big danger after a long time. At this point you can remove it, use a thin line and drop it in the middle, wait for a while, see if it sinks in that direction, and then gently place on the grinding wheel where it will sink. Just a few minutes.
Linear cross-belt Logistic Sorting Machine is our R&D newest product recently, one person can operate as well as two persons can operate at the same time to improve efficiency. Crossbelt Logistic Sorting Machine which has 30 carriers covers about 300 square meters, rent cost would be reduced. Of course carriers of logistic sorting machine can be increased or deducted according customer's requirement.
Easy to install that plug and play, also easy to operate by touch screen. With machanical technology, Crossbelt Sorter Vertical lower the energy cost. As well maintainance cost and hardness would be reduced by simple design.
Logistic Sorting Machine
Logistic Sorting Machine, Crossbelt Logistic Sorting Machine, Crossbelt Sorter Vertical, Vertical Cross Belt Sorting Machine, Linear Crossbelt Logistic Sorting Machine, Vertical Crossbelt Logistic Sorting Machine
Changshu Bealead Automatic Machine CO., LTD. , https://www.bealeadglobal.com