Fire Resistant Whole Core Fire Retardant PVC/Pvg Conveyor Belt
BAODING HUAYUE RUBBER BELTS CO., LTD
Baoding Huayue Rubber Belts Co., Ltd is one of the top 10 conveyor belt manufacturers in China. With over 800 employees, the company has a registered capital of 200 million RMB and an annual production capacity of 30 million square meters.
MAIN PRODUCTS
EP Conveyor Belt
Nylon Conveyor Belt
Canvas Conveyor Belt
Steel Cord Conveyor Belt
Sidewall Conveyor Belt
Fire Retardant (PVC, PVG) Conveyor Belt
Heat Resistant Conveyor Belt
Cold Resistant Conveyor Belt
Oil/Acid/Alkali Resistant Conveyor Belt
Special Pattern (Chevron) Conveyor Belt
Conveyor Idler/Roller
Conveyor Frame/Bracket
Head Pulley/Tail Pulley
GENERAL SPECIFICATION
Layer: 1-10 ply
Width: 400-2200mm
Thickness: 3-30mm
STANDARDS
DIN22102, RMA, AS1333, AS1332, DIN22109, DIN14890, DIN22102, ISO22721, ISO3684, SANS1173, SANS1366, SANS971, JISK6322, BS3289, ISO14890
WHOLE CORE FLAME RESISTANT CONVEYER BELT (PVC/PVG TYPE)
This type of conveyor belt is divided into two types: PVC and PVG. The PVC conveyor belt has top and bottom layers made of PVC coating cover, with a single-sided tape thickness ≥1.0mm and slope angle <16°. The PVG conveyor belt has upper and lower layers made of nitrile rubber and PVC, featuring TPE properties, with a single-sided tape thickness of 1mm-3mm and slope angle <20°.
Structure: It is made from the whole core via dipping and plastifying in polyvinyl chloride (PVC) dipping agent or vulcanization. It is fire retardant, anti-static, shock resistant, abrasion resistant, and corrosion resistant.
Application: For the underground well haulage of coal mines, the conveyance of materials for metallurgical and chemical industries.
Technical Data
STEEL CORD CONVEYER BELT
General Steel Cord Conveyer Belt
It uses the new type steel cord as the tear resistant element. It has high tension strength, small elongation, excellent troughability and high flexibility, and it is applicable for the conveyance of materials with long distance, large freight volume and high speed.
Tear Resistant Steel Cord Conveyor Belt
On one side or two sides vertical that is perpendicular to the lengthways steel cable, evenly lay the reinforcing layer of the steel cable, steel cord, fabric, etc. It has excellent impact and tearing resistance performance.
Tear Resist Belt With Detector
It uses the new type steel cord as the tear resistant element. Between the steel cord conveyor belts' core rubber and bottom cover, build in the phase shift sensor (coil) at a certain distance lengthways.
It gives out an alarm and stops running automatically whenever a tearing of the belt is detected, or the belt runs abnormally and reaches the preset off speed.
Technical Data
| PVC | Standard MT914-2008 | Safety Coefficient 10 (Break Strength ×1/10) | |||||
| Slope Angle <16° | |||||||
| PVG | Standard MT914-2008 BS3289 HG2805 | ||||||
| Slope Angle <20° | |||||||
| Standard Type | Grade | Break Strength≥, N/mm | Elongation at Break % | Advising Min Dia. of Transmission Drum (mm) | |||
| Longitudinal | Horizontal | Longitudinal | Horizontal | PVC | PVG | ||
| 680S | 4 | 600 | 265 | ≥15% | ≥18% | 320 | 400 |
| 800S | 5 | 800 | 280 | 400 | 500 | ||
| 1000S | 6 | 1000 | 300 | 500 | 630 | ||
| 1250S | 7 | 1250 | 350 | 500 | 750 | ||
| 1400S | 8 | 1400 | 350 | 630 | 750 | ||
| 1600S | 9 | 1600 | 400 | 1000 | 1000 | ||
| 1800S | 10 | 1800 | 400 | 1000 | 1000 | ||
| 2000S | 11 | 2000 | 400 | 1250 | 1250 | ||
| 2240S | 12 | 2240 | 450 | 1250 | 1250 | ||
| 2500S | 13 | 2500 | 450 | 1400 | 1400 | ||
| Technical Data | Belt Strength | |||||||||||||
| ST/S 630 |
ST/S 800 |
ST/S 1000 |
ST/S 1250 |
ST/S 1600 |
ST/S 2000 |
ST/S 2500 |
ST/S 2800 |
ST/S 3150 |
ST/S 3500 |
ST/S 4000 |
ST/S 4500 |
ST/S 5000 |
ST/S 5400 |
|
| Longitudinal Tensile Strength (N/mm) | 630 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 2800 | 3150 | 3500 | 4000 | 4500 | 5000 | 5400 |
| Max Nominal Dia. of Steel Cord (mm) | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 6.0 | 7.2 | 7.5 | 8.1 | 8.6 | 8.9 | 9.7 | 10.9 | 11.3 |
| Steel Cord Pitch (mm) | 10 ±1.5 | 10 ±1.5 | 12 ±1.5 | 12 ±1.5 | 12 ±1.5 | 12 ±1.5 | 15 ±1.5 | 15 ±1.5 | 15 ±1.5 | 15 ±1.5 | 15 ±1.5 | 16 ±1.5 | 17 ±1.5 | 17 ±1.5 |
| Thickness of Top Cover (mm) | 5 | 5 | 6 | 6 | 6 | 6 | 8 | 8 | 8 | 8 | 8 | 8 | 8.5 | 9 |
| Thickness of Bottom Cover (mm) | 5 | 5 | 6 | 6 | 6 | 6 | 8 | 8 | 8 | 8 | 8 | 8 | 8.5 | 9 |
| Width (mm) | Numbers of Steel Cord | |||||||||||||
| 800 | 75 | 75 | 63 | 63 | 63 | 63 | 50 | 50 | 50 | 50 | ||||
| 1000 | 95 | 95 | 79 | 79 | 79 | 79 | 64 | 64 | 64 | 64 | 64 | 59 | 55 | 55 |
| 1200 | 113 | 113 | 94 | 94 | 94 | 94 | 76 | 76 | 76 | 76 | 76 | 71 | 66 | 66 |
| 1400 | 133 | 133 | 111 | 111 | 111 | 111 | 89 | 89 | 89 | 89 | 89 | 84 | 78 | 78 |
| 1600 | 151 | 151 | 126 | 126 | 126 | 126 | 101 | 101 | 101 | 101 | 101 | 96 | 90 | 90 |
| 1800 | 171 | 171 | 143 | 143 | 143 | 143 | 114 | 114 | 114 | 114 | 114 | 109 | 102 | 102 |
| 2000 | 196 | 196 | 159 | 159 | 159 | 159 | 128 | 128 | 128 | 128 | 128 | 121 | 113 | 113 |
| 2200 | 216 | 216 | 176 | 176 | 176 | 176 | 141 | 141 | 141 | 141 | 141 | 134 | 125 | 125 |
| The Recommended Minimum Pulley Diameter | ||||||||||||||
| ST Belt Type | ST/S 630 |
ST/S 800 |
ST/S 1000 |
ST/S 1250 |
ST/S 1600 |
ST/S 2000 |
ST/S 2500 |
ST/S 2800 |
ST/S 3150 |
ST/S 3500 |
ST/S 4000 |
ST/S 4500 |
ST/S 5000 |
ST/S 5400 |
| Minimum Pulley Diameter (mm) | 500 | 500 | 630 | 800 | 1000 | 1000 | 1250 | 1250 | 1400 | 1600 | 1600 | 1600 | 1800 | 1800 |
Dredge Suction & Discharge Hose
Dredge Suction & Discharge Hose,Dredge Suction Hose,Dredge Discharge Hose,Dredge Hose
Hebei no one but god energy equipment co.,ltd , https://www.p-harcourtbrothers.com