Multi-Scale Scrap Copper Wire Separator Machine

Model NO.: FC

Function: Scrap Copper Wire Recycling

Structure: Compact

Recycling Method: Dry Type

Applicable Wire: All Kinds of Copper/Aluminum Cable

Working Principle: Crushing & Separating

Processed Wire Diameter: 0.3-40mm

Voltage: Customized

Trademark: FORCHEN

Transport Package: Ply Wooden Case

Specification: weight: 800-12000kg

Origin: Henan, China

HS Code: 8479

Copper Wire Granulator General Introduction
This copper wire recycling machine is used for recycling scrap copper wires and cables, such as automobile wires, telecommunication wires, and other kinds of copper wires, in order to recover copper. This machine consists of Crusher, Crushed Material Channel, Vibrating Separator, Air Blower, Dust Collector, and the Underbed, etc.

Copper Wire Granulator Main Features:
1. No water needed, just put cable wires into the plant
2. Turnkey and compact type, PLC controller, only 1-2 workers to operate, occupy small area
3. Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires

Raw Material Input:
Multi-Scale Scrap Copper Wire Separator Machine

Final Copper & Plastic Granules Output:
Multi-Scale Scrap Copper Wire Separator Machine

Copper Wire Granulator Working Process:

1. Put wires and cables into the crusher, where they are crushed and the plastic sheath and copper are separated completely. The length of the crushed material depends on the mesh size of the sieve. Larger mesh sizes result in longer crushed materials and higher output. The mesh should be chosen based on the type of material during production.

2. The crushed material (a mixture of copper granules and plastic pieces) is conveyed to the separator via a conveyor. During this process, dust and some light-weight plastic pieces (including fibers, ropes, or tapes mixed in the wires) are collected by the pressure-reducing blower. The opening of the pressure-reducing blower is connected to the dust collector, which uses a dust collection bag to prevent dust discharge for environmental protection. Dust and some light-weight plastic pieces are collected in the bag and discharged when it is full.

3. The separator is used for separating plastic pieces and copper granules. Based on differences in physical properties and specific gravity between materials, there is a specific gravity deviation under the forces of aerodynamics and vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (with larger specific gravity) will move to the bottom of the sieve and from down to up, while plastic pieces (with smaller specific gravity) will move above the copper granules and from up to down. In the end, both are discharged through different openings.

4. All units are installed on the Underbed to form a complete structure. The machine is adjusted and ready for production before shipping, so the customer only needs to connect it to the power supply.

Copper Wire Granulator Technical Parameters:

Model	Processing Capacity (kg/h)	Processed Wire Dia.	Total Power	Voltage	Dimension	Weight
FC-400-1	80-120	0.3-20mm	11.92KW	customized	1.51.51.9m	750kg
FC-400	200-250		23.12KW		2.71.92.3m	1200kg
FC-600A	300-400		48.36KW		41.852.4m	3400kg
FC-600	300-400		52.36KW		4.31.952.4m	3400kg
FC-800	600-800	0.1-40mm	75.4KW		9.12.33.54m	8000kg
FC-1200	1000-1200	0.1-40mm	129.6KW		16103m	12000kg

Different Models of Copper Wire Granulator:
Multi-Scale Scrap Copper Wire Separator Machine

Contact us freely for more detailed quotation.

Machining Center

What is a CNC machining center?

CNC machining center is composed of mechanical equipment and CNC system, suitable for processing complex parts of high efficiency automated machine tools, and the use of cnc control system to generate digital signals to drive the milling machine mechanism to do precision machining action, in layman's terms is the computer edited program is transmitted to the machine tool, control the machine tool automatically to a product processed out. Previously, ordinary milling machines are manually operated by the manual tool change and cutting, can only process some simple workpiece, and processing efficiency is low, and the quality is not high. And CNC machining center generally comes with tool magazine, are automated processing, including the elimination of Tang Xuan decoration work threads and cutting threads, etc., with a variety of processing work to go process means, comprehensive processing capabilities are very strong.

CNC machining or computer numerical control machining is a digital manufacturing technology, CNC machines can rotate around a different number of axes, tools are usually three or five axes. The basic CNC process can be divided into. An engineer first designs a CAD model of the part, and then a technician converts the CAD file into a CNC program called G-code.

Machining Center,Vertical Turning Machines,Vertical Machining Center,Horizontal Machining Center Spindle

Ningbo Yien Machinery Co., Ltd , https://www.yienmachinery.com